NFPA 1971 Firefighter Uniforms Turnout Gear PBI Matrix Outer Layer

NFPA Fire Fighting Uniform Turnout Gear firefighter uniform

It has four layers,including flame retardant, waterproof and breathable layer, thermal insulation layer and comfort layer.And these functional layers make sure the uniform has the performance of fire prevention, permanent flame retardance, acid and alkali resistance, oil resistance, antistatic, wear resistance, waterproof and breathable, etc. The innermost lining of sleeve cuffs,cloth hem,and trouser cuffs are produced by the Anti-watering material of STEDPRENE FR. The shoulder pad is made of outer shell material with Kevlar felt,and knee pad is made by STEDSHIELD FR with Kevlar felt.

Besides, there are some convenient and unique designs of this type uniform,such as one radio pocket on left chest, one flashlight hook and adjustable fastener on right chest, two cargo pockets on jacket hem and trousers sides.

Specification

Maintenance Methods of Firefighting Uniform:

After taking firefighting uniform off each time, check its condition,especially check if it is worn.

If the applier want to remove the residual dirt on the fire suit, tap water and neutral soap can be used, or detergent can be used if necessary. Just clear the contaminated part, and carefully not to damage the outermost layer.

If there is not very serious burn mark or wear on the surface of uniform, repair the damaged parts. If there is damage on the outside of the clothes, please replace .

Other Recommended Products